C Body Wanted ( Cars & Parts )

Trim clips for 1968 Chrysler Newport

feeds@yuku.com (Mutsu) — Sun, 13 Dec 2009 21:49:37 GMT

I am looking for trim clips for a 1968 Chrysler Newport. The metal clips I need hold on the stainless trim around the tail lights. The metal clips insert into a plastic sleeve and the sleeve then slides into the stainless trim so that it can be attached to the car. I was able to salvage 7 metal clips, but I still need at least 9 more. Can anyone help? I have posted images of the clips in question on my page.

Searching for 1973 New Yorker Parts!

feeds@yuku.com (Piot) — Wed, 12 Aug 2009 18:51:59 GMT

Inside:
- Left A and C Pillar and right A Pillar in Blue.

Outside:
-Ornamental Trim over the New Yorker Emblem on the left front fender,
-Wheelhouse Molding on the right rear fender,
-Rear Taillightlenses,
-Radio Antenna (the Motor works, only the Antenna break).

Thank you!

68 Fury Parts

feeds@yuku.com (Windsor56) — Sun, 19 Jul 2009 17:47:38 GMT

I need a z-bar for my shifting linkage on my 68 fury 440 project please help thanks Joe

'65 Fury III 4 Speed Speedo Cable

feeds@yuku.com (ccholiday) — Sun, 21 Jun 2009 11:44:23 GMT

Looking for a new cable and sources to buy.

NEED NICE FRONT AND REAR VALANCE FOR 70 FURY

feeds@yuku.com (6pack71bee) — Fri, 23 Jan 2009 22:31:16 GMT

I NEED A NICE FRONT AND/OR REAR VALANCE FOR MY 1970 FURY RESTORATION. ALSO NEED A FEW OTHER PARTS IF YOU HAVE A PARTS CAR PLEASE LET ME KNOW. IF YOU WILL SHIP, PLEASE SEND SOME PICS ALONG WITH PRICE. I AM LOCATED IN SOUTHEAST ALABAMA. CONTACT ME @ SOPOORITHURTS@GRACEBA.NET.

NEED FURY A PILLARS FOR MY RESTORATION

feeds@yuku.com (6pack71bee) — Fri, 23 Jan 2009 22:28:29 GMT

I AM IN NEED OF SOME CLEAN A-PILLARS FOR MY 70 PLYMOUTH FURY RESTORATION. MY CAR HAD A VINYL TOP AND MINE ARE JUNK. IF YOU HAVE A 69-71 FURY 2 DOOR OR A 4 DOOR WITHOUT POST BODY THEY WILL WORK. PREFER FROM A NON VINLY TOP CAR IF POSSIBLE BUT WILL TAKE ANY THAT ARE CLEAN. IF YOU HAVE ANY PLEASE LET ME KNOW BEFORE CUTTING OFF SO I CAN SEND SOME PICS TO SHOW HOW MUCH OF THE METAL I NEED. THANKS FOR ANY HELP. THIS IS HOLDING UP MY PAINTJOB. IF YOU WILL CUT OFF AND SHIP PLEASE LET ME KNOW HOW MUCH...

69 Polara Trim

feeds@yuku.com (Mack) — Mon, 03 Nov 2008 17:59:05 GMT

I'm looking for the right rear quarter extension moulding from a 69 Polara or Monaco. About any condition other than torn is fine.
waynem@runningsff.com

68 Dodge Monaco Tail Lights

feeds@yuku.com (cbody70) — Sat, 18 Oct 2008 19:39:27 GMT

Looking for good lenses and decent chrome with minimal pitting. enail cbody70@yahoo.com

Looking for 73 C-Body spindles for disk brakes

feeds@yuku.com (40yearoldFuryIII) — Wed, 08 Oct 2008 18:04:46 GMT

He all!
I am planning to convert my 68 Fury to front disks and want to use the 73 spindle conversion method. I am looking for spindles, backing plates, calipers and rotors.....You can reach me at guzinski@comcast.net or PM me.....Thanks!

wanted 72 fury front bumper brackets,nos bumper

feeds@yuku.com (72pp29) — Sun, 05 Oct 2008 18:50:46 GMT

need front bumper brackets for my 72 fury, wrecked it last week. also could use an nos front bumper if not to expensive. moparcarguy@hotmail.com

Bucket seat part for 1970 Chrysler 300

feeds@yuku.com (1966mopar) — Mon, 29 Sep 2008 18:02:41 GMT

I am looking for the large plastic (any color) bucket seat back for my 1970 Chrysler 300 2 door. The part should be the same for right or left. I need one that is uncracked!
This piece has vertical (up & down) ribs on the bottom half of it.
These bucket seat backs were the same on any 1970 Chrysler 300 2 doors, or 4 doors if equipped with buckets. Also, they should be the same for any 1970 Newport or New Yorkers with bucket seats. My info tell me that the same bucket seat backs...

Washer tank

feeds@yuku.com (PolaraPaul) — Wed, 24 Sep 2008 18:00:55 GMT

I need a washer tank - the one that mounts on the D/S fender - looks like someone leaned on the top of mine and cracked it.
thanks
1971 Dodge Polara 383

1971 Dodge Polara stop light switch

feeds@yuku.com (PolaraPaul) — Sat, 13 Sep 2008 21:28:57 GMT

I am looking for a good stop light switch for a 1971 Polara with cruise.
You can reach me at savoy1@cox.net
Thanks!

Wanted: 69, 70 or 71 Plymouth Fury A Pillars

feeds@yuku.com (6pack71bee) — Fri, 05 Sep 2008 22:34:17 GMT

If you have a 1969, 1970 or 1971 Plymouth Fury parts car i need a pair of outer A Pillars that are in good condition. My car had the vinyl top originally and mine are rusted out. need these to finish up my restoration. Pretty sure all 3 years, 2 or 4 door are the same. if you have some please contact me before cutting off as i need the A Pillar including part of the cowl. i can send a pic of mine so you will know how much to cut out. if available please e-mail pics and price to

WTB: 1970 Plymouth Fury front and rear valances

feeds@yuku.com (6pack71bee) — Fri, 05 Sep 2008 22:26:59 GMT

Looking for a nice front and/or rear valance for the 1970 Sport Fury i am restoring. also need the front turn signal lenses, outer a pillars and a few other small items. if you have any of these items please let me know. if you will ship please e-mail pics and price to SOPOORITHURTS@GRACEBA.NET . Thanks, steve.

79 300 need wiper "linkage grommet

feeds@yuku.com (tdenkler) — Sun, 24 Aug 2008 20:45:34 GMT

Hi need the @2.5 inch "wiper linkage grommet" for 79 300. also, 140mph speedo from police car or such.

ALso, still looking for console plate top for chrysler 300 L 4 Speed.

Thanks,

tdenkler3853@earthlink.net

1968 Fury c-body parts needed

feeds@yuku.com (40yearoldFuryIII) — Mon, 14 Jul 2008 13:09:12 GMT

Hi all,
I am looking for a few parts for my 1968 Fury III 2 door hard top. They can be Used or NOS.
Side rear quarter trim and end (white/stainless)
Left front wheel trim
Upper window weatherstripping rt&lf
Rear window regulators
Dash pad (color not important)
Glove box liner
Seat hinge covers
Hood hinges
Window cranks
Arm rest pad front 1
Arm rest pad rear 1
Arm rest base rear 1
Trunk trim
My email is

74-77 Monaco/Fury/Gran Fury L (drivers side) rear sail panel

feeds@yuku.com (ISP 543) — Tue, 27 May 2008 14:37:30 GMT

74-77 Monaco/Fury/Gran Fury L (drivers side) rear sail panel.
For my 75 Michigan State Police Plymouth Gran Fury restoration. I cracked the one I have and would like a replacement. Preston@fotki.com

65 Newport Convertible window Mechanism

feeds@yuku.com (65NewportConv) — Mon, 07 Apr 2008 15:37:08 GMT

I need a rear passenger side window mechanism for my 65 Newport conv. Mine is bent beyond repair. It is a manual crank, my glass is okay but I might need a spare before I get it all back together. Also need a drivers side mirror with remote. Mine has a cable broken which makes it a bit tough to adjust. Daily family cruiser so mint is not needed. Let me know what you have. respond here or newrulz@msn.com

1970/1 sport fury parts needed

feeds@yuku.com (shaker19981) — Sun, 30 Mar 2008 11:01:49 GMT

Looking for a 2 door 1970/1971 Sport Fury hardtop package tray in good condition. Also need 1970 22" radiator 2998969 and dash pad sport fury wood grain emblem. Call Me @ 313-657-7661 or e mail me at shaker19981@yahoo.com
Dave